抖淫视频

• Pargos (Lutjanus spp.),
• Dorados (Coryphaena hippurus),
• Cabrillas (Epinephelus spp., Paralabrax spp.),
• Marlines (Makaria spp., Tetrapturus spp.), or
• Corvinas (Sciaena spp.),
• Meros (Epinephelus guaza).

• Pargos (Lutjanus spp.),
• Dorados (Coryphaena hippurus),
• Cabrillas (Epinephelus spp., Paralabrax spp.),
• Marlines (Makaria spp., Tetrapturus spp.), or
• Corvinas (Sciaena spp.),
• Meros (Epinephelus guaza).

• Atmospheric distillation – A separation process in which petroleum oils are converted, in a distillation tower, into fractions according to boiling point and the vapor then condensed into different liquefied fractions. Liquefied petroleum gas, naphtha, gasoline, kerosene, diesel/heating oil, light gas oils, and lubricating oil are produced from petroleum distillation;
• Vacuum distillation – Distillation at a pressure below atmospheric but not so low that it would be classed as molecular distillation. Vacuum distillation is useful for distilling high-boiling and heat-sensitive materials such as heavy distillates in petroleum oils to produce light to heavy vacuum gas oils and residuum. In some refineries gas oils may be further processed into lubricating oils;
• Catalytic hydroprocessing – The cracking and/or treating of petroleum oils with hydrogen at high temperature and under pressure, in the presence of special catalysts. Catalytic hydroprocessing includes hydrocracking and hydrotreating;
• Reforming (catalytic reforming) – The rearrangement of molecules in a naphtha boiling range material to form higher octane aromatics (i.e., improved antiknock quality at the expense of gasoline yield). A main product is catalytic reformate, a blend component for gasoline. Hydrogen is another by-product;
• Alkylation – A process whereby a high-octane blending component for gasolines is derived from catalytic combination of an isoparaffin and an olefin;
• Cracking – A refining process involving decomposition and molecular recombination of organic compounds, especially hydrocarbons obtained by means of heat, to form molecules suitable for motor fuels, monomers, petrochemicals, etc.:
  • Thermal cracking – Exposes the distillate to temperatures of approximately 540-650C (1000 1200F) for varying periods of time. Process produces modest yields of gasoline and higher yields of residual products for fuel oil blending,
  • (ii) Catalytic cracking – Hydrocarbon vapors are passed at approximately 400C (750F) over a metallic catalyst (e.g., silica-alumina or platinum); the complex recombinations (alkylation, polymerization, isomerization, etc.) Occur within seconds to yield high-octane gasoline. Process yields less residual oils and light gases than thermal cracking;
• Coking – A thermal cracking process for the conversion of heavy low grade products, such as reduced crude, straight run pitch, cracked tars, and shale oil into solid coke (carbon) and lower boiling hydrocarbon products which are suitable as feed for other refinery units for conversion into lighter products; and
• Isomerization B – The refinery process of converting petroleum compounds into their isomers.

• at least one of the component goods of the set is originating, and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating, and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• the good is imported into the territory of the Party from the United States of America or Mexico; and
• the good complies with the rules of origin under this Agreement, assuming for this purpose only that the territory of the United States of America and Mexico were part of the free trade area established by this Agreement.

• 100% polyester crushed panned velour fabric, not exceeding 271 grams per square metre, of a circular knit construction of subheading 6001.92;
• single ring-spun yarn of yarn numbers 51 to 85 metric, containing 50% or more but less than 85%, by weight, of 0.9 denier or finer micro modal fibre, mixed solely with U.S. origin extra-long pima cotton, of subheading 5510.30;
• knitted fabric of 85% wool (210 grams per square metre), of subheading 6006.90.

• Fabric of subheading 5111.11 or 5111.19, if hand-woven, with a loom width of less than 76 cm, woven in the United Kingdom in accordance with the rules and regulations of the Harris Tweed Authority, Ltd., and so certified by the Authority;
• Fabric of subheading 5112.30, weighing not more than 340 grams per square metre, containing wool, not less than 20% by weight of fine animal hair and not less than 15% by weight of man-made staple fibre;
• Batiste fabric of subheading 5513.11 or 5513.21, of square construction, of single yarns exceeding 76 metric count, containing between 60 and 70 warp ends and filling picks per square centimetre, of a weight not exceeding 110 grams per square metre;
• Fabric of subheading 5208.22 or 5208.32, not of square construction, containing more than 75 warp ends and filling picks per square centimetre, of average yarn number exceeding 135 metric;
• Fabric, other than fabric containing polyester or nylon filaments mixed mainly with cotton, of subheading 5407.81, 5407.82, or 5407.83, weighing less than 170 grams per square metre, having a dobby weave created by a dobby attachment of average yarn number exceeding 135 metric;
• Fabric of subheading 5208.42 or 5208.49, not of square construction, containing more than 85 warp ends and filling picks per square centimetre, of average yarn number exceeding 85 metric, of average yarn number exceeding 135 if the fabric is Oxford construction;
• Single ring-spun yarn of yarn numbers 51 to 85 metric, containing 50% or more but less than 85%, by weight of 0.9 denier or finer micro modal fibre, mixed solely with U.S. origin extra-long pima cotton, of subheading 5510.30;
• 100% cotton woven flannel fabric, of single ring spun yarns of different colours, of yarn numbers 21 through 36 metric, of subheading 5208.43, of 2 x 2 twill weave construction, weighing not more than 200 grams per square metre;
• Fabric of the following subheadings of average yarn number exceeding 93 metric: 5208.21, 5208.22, 5208.29, 5208.31, 5208.32, 5208.39, 5208.41, 5208.42, 5208.49, 5208.51, 5208.52 or 5208.59;
• Woven fabric of subheading 5515.13, combed of polyester staple fibre mixed with wool, and containing less than 36% by weight of wool, other than for uniforms designed to identify members of a specific group;
• Woven fabrics, other than woven fabric of polyester staple fibre, of subheading 5512.99, containing 100% by weight of synthetic staple fibre, not of square construction, of average yarn number exceeding 55 metric;
• Woven fabric of subheading 5512.21 or 5512.29, of 100% acrylic fibre, of average yarn number exceeding 55 metric;
• Poplin, ring spun, woven fabric of 97% cotton, 3% spandex, of metric number 42 or lower, of subheading 5208.32;
• Two-way stretch woven fabric of polyester/rayon/spandex (62/32/6%), other than of yarns of different colours, jacquard weave, poplin, broadcloth, sheeting, printcloth, cheesecloth, lawns, voiles, batistes, duck, satin weave, twill weave or Oxford cloth of subheading 5515.19;
• Two-way stretch woven fabric of polyester/rayon/spandex (71/23/6%), of subheading 5515.19;
• Dyed rayon blend (70% rayon/ 30% polyester) herringbone twill fabric, of subheading 5516.92, weighing more than 200 grams per square metre, other than fabric containing Lyocell, viscose staple fibre or aramid fibre;
• Printed 100% rayon herringbone fabric, of subheading 5516.14, weighing more than 200 grams per square metre, other than fabric solely of Lyocell staple fibre; or

• Fabric of subheading 5208.21, 5208.22, 5208.29, 5208.31, 5208.32, 5208.39, 5208.41, 5208.42, 5208.49, 5208.51, 5208.52, or 5208.59 of average yarn number exceeding 135 metric;
• Fabric of subheading 5513.11 or 5513.21, not of square construction, containing more than 70 warp ends and filling picks per square centimetre, of average yarn number exceeding 70 metric;
• Fabric classified in subheading 5210.21 or 5210.31, not of square construction, containing more than 70 warp ends and filling picks per square centimetre, of average yarn number exceeding 70 metric;
• Fabric of subheading 5208.22 or 5208.32, not of square construction, containing more than 75 warp ends and filling picks per square centimetre, of average yarn number exceeding 65 metric;
• Fabric, other than fabric containing polyester or nylon filaments mixed mainly with cotton, of subheading 5407.81, 5407.82 or 5407.83, weighing less than 170 grams per square metre, having a dobby weave created by a dobby attachment;
• Fabric of subheading 5208.42 or 5208.49, not of square construction, containing more than 85 warp ends and filling picks per square centimetre, of average yarn number exceeding 85 metric;
• Fabric of subheading 5208.51, of square construction, containing more than 75 warp ends and filling picks per square centimetre, made with single yarns, of average yarn number 95 or greater metric;
• Fabric of subheading 5208.41, of square construction, with a gingham pattern, containing more than 85 warp ends and filling picks per square centimetre, made with single yarns, of average yarn number equal to or exceeding 95 metric, and characterized by a check effect produced by the variation in colour of the yarns in the warp and filling; or
• Fabric of subheading 5208.41, with the warp coloured with vegetable dyes, and the filling yarns white or coloured with vegetable dyes, of average yarn number exceeding 65 metric.
• A change to subheading 6205.20 through 6205.30 from any other chapter, except from heading 51.11 through 51.12, 52.04 through 52.12, 54.07 through 54.08, 55.08 through 55.16 or 60.01 through 60.06, provided that the good is both cut and sewn or otherwise assembled in the territory of one or both of the Parties.

• at least one of the component goods of the set is originating, and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• 35% where the transaction value method is used, or
• 25% where the net cost method used.

A change to subheading 8414.10 through 8414.80 from any other heading; or

A change to subheading 8414.10 through 8414.80 from subheading 8414.90, whether or not there is also a change from any other heading, provided there is a regional value content of not less than 35% under the transaction value method.

• at least one of the component goods of the set is originating, and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method; or

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• 30% where the transaction value method is used, or
• 20% where the net cost method is used.

• 35% where the transaction value method is used; or
• 25% where the net cost method is used

• 30% where the transaction value method is used; or
• 20% where the net cost method is used.

• 30% where the transaction value method is used; or
• 20% where the net cost method is used.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method; or

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.

• at least one of the component goods of the set is originating; and
• the regional value content of the set is not less than 50% under the transaction value method.